A solar pool blanket is a worthwhile investment for anyone wanting to keep their pool warmer, reduce evaporation and get more use out of their swimming pool. However, like any product that spends much of its life exposed to the Australian sun, it needs a little care to maintain its condition.
One of the more common problems with solar blankets is premature deterioration. A cover that is regularly left exposed to direct sunlight while rolled up, stored incorrectly or handled roughly can wear out sooner than expected. Some damage is gradual, with bubbles weakening or sections becoming brittle, while other problems can develop because of how the cover is positioned and stored between uses.
Looking after a solar blanket does not require a complicated maintenance routine, but a few sensible habits can make a considerable difference to its lifespan.
Why Solar Pool Blankets Need Proper Care
Solar blankets are designed to float directly on the surface of the pool. Their bubble construction helps collect solar energy and retain warmth in the water, while also reducing evaporation. Because they are constantly exposed to pool water, chemicals, sunlight and changing temperatures, the material needs to be treated properly.
Chlorine and other pool chemicals are necessary for maintaining water quality, but excessive chemical concentrations can affect the cover material over time. Strong sunlight and heat can also accelerate deterioration, particularly when a blanket is left exposed on a roller without suitable protection.
This is why following the manufacturer’s care instructions is important. A quality blanket is designed for outdoor use, but that does not mean it should be left exposed to unnecessary heat or chemical damage when it is not covering the pool.
Avoid Leaving Your Blanket Exposed on the Roller
One of the most important things you can do to protect a solar blanket is to avoid leaving it sitting in direct sunlight while rolled up.
When a blanket is spread across the pool, it is in contact with the water and its heat is distributed across a large surface. Once rolled up, however, the material is concentrated in a much smaller area. Heat can build up within the roll, particularly when it is exposed to strong sunlight for extended periods. This can contribute to premature deterioration and damage to the material.
A suitable protective over-cover helps shield the rolled blanket from direct sunlight when it is not in use. It is worth checking that the cover is designed for this purpose rather than simply throwing a generic tarpaulin over the roller, as unsuitable materials can trap or reflect heat in ways that may cause further problems.
If your pool has a roller system, make protecting the blanket part of your normal routine. Once the cover has been removed from the water, ensure it is properly protected rather than leaving it exposed beside the pool.
Keep Pool Chemicals at the Recommended Levels
Pool chemistry is another factor that can influence how long your solar blanket lasts. High chlorine concentrations, particularly following a superchlorination treatment, can be harsh on the material if the blanket remains on the water.
When carrying out a shock treatment or adding a high dose of chlorine, follow the instructions supplied with your pool chemicals and the blanket manufacturer’s guidance. For Daisy UltraDome covers, the product care instructions recommend removing the blanket during superchlorination and leaving it off until chlorine levels have returned to the recommended range.
It is also sensible to maintain regular water testing rather than allowing chemical levels to fluctuate significantly. A properly balanced pool is better for the cover as well as the pool equipment and surfaces.
If you have recently added chemicals or treated the water, check the manufacturer’s recommendations before putting the blanket back on. The correct waiting period will depend on the treatment and the product instructions.
Use the Roller Correctly
A pool blanket roller makes removing and replacing a solar cover considerably easier, particularly on larger pools where handling the material manually can become awkward. It also helps prevent unnecessary dragging, folding and pulling that can damage the blanket.
When using the roller, make sure the cover winds evenly rather than bunching up at one end. Avoid pulling it at an angle or allowing it to catch on sharp edges around the pool. Repeated friction against paving, coping or other hard surfaces can wear through the material over time.
It is also worth checking the roller periodically. Make sure it moves freely, the castors are in good condition and any locking mechanisms are working properly. A roller that is difficult to operate can make the cover more cumbersome to use, which often means pool owners become less consistent about putting it on and taking it off.
For larger pools, choosing a suitable roller when purchasing the blanket can make everyday use much easier and help protect the cover from unnecessary handling.
Clean the Blanket Without Damaging the Material
Solar blankets will naturally collect some dust, dirt and residue during normal use. Salt pools can also develop a chalky residue on the surface of the material, which may make the blanket look less attractive over time.
When cleaning the cover, avoid aggressive chemicals, abrasive brushes or high-pressure cleaning equipment unless the manufacturer specifically recommends them. In most cases, rinsing with clean water and using a soft brush where needed is a more appropriate approach.
If you notice a build-up of residue, check the manufacturer’s cleaning instructions before using any cleaning products. Strong detergents or solvents may affect the material and are unlikely to be necessary for routine maintenance.
It is also worth remembering that a solar blanket is not designed to keep leaves and debris out of the pool. Because it floats on the water and is cut close to the pool’s waterline, debris can still collect around the edges or on top of the blanket. If keeping the pool clean is your main concern, a dedicated leaf and debris cover is a better option.
When Is It Time to Replace Your Solar Blanket?
Even with proper care, solar blankets will eventually wear out. The amount of sunlight they receive, the pool’s chemical balance, how frequently they are handled and the quality of the original material can all influence how long they remain in good condition.
Signs that a blanket may need replacing include bubbles that have deteriorated or become brittle, sections that are splitting, material that is no longer holding together properly and noticeable deterioration across large areas of the cover.
A few isolated marks do not necessarily mean the entire blanket needs replacing, but widespread damage can reduce its effectiveness and make it difficult to handle. If the cover is no longer performing as it should, it may be worth having it assessed before deciding whether replacement is necessary.
Quality also matters when purchasing a replacement. Just Covers supplies Daisy solar blankets, including the 525 micron UltraDome range, which carries a 10-year pro-rata warranty for household use. Checking the product specifications and warranty conditions before purchasing can help you understand what is covered and what care is expected.
Choosing a Solar Blanket That Suits Your Pool
Looking after a solar blanket starts with choosing the right product and making sure it is suitable for your pool. The size, shape of the pool, available roller space and how frequently you intend to use the cover should all be considered before ordering.
A correctly measured blanket should sit neatly across the water rather than being unnecessarily oversized or difficult to manage. Just Covers offers custom-measured solar blankets and installation across Greater Brisbane, Sydney, Melbourne, Canberra, Perth and other serviced regions. Custom precut options are also available for pool owners who prefer to handle installation themselves.
You can learn more about the available solar pool covers and rollers and the different options for your pool.
A solar blanket is much easier to look after when it is properly fitted, simple to remove and stored correctly between uses. With the right product and a few straightforward care habits, you can protect your investment and continue getting the benefits of a warmer pool and reduced water evaporation.
If you need help choosing a replacement solar blanket or finding the right roller system, contact Just Covers to discuss your pool and the options available.
